Ninja Transfers DTF Gang Sheet Builder

Don't have a ready to print Gang Sheet? Let Ninja Transfers guide you through the easy building process with our New Gang Sheet Builder! Simply upload any artwork, resize, remove backgrounds and duplicate as many copies as you need! Designing has never been easier! 

FEATURES

• High-Quality Prints: Vibrant, opaque colors for a standout finish.
• No Minimums: Flexibility to order any quantity.
• Custom Sizes: Tailored sizing options available.
• Durable: Designed to last through multiple washes.
• Fast Shipping: Quick turnaround with rush options.
• Versatile Application: Works on a variety of materials.
• Cost-Effective: Competitive pricing with bulk discounts.
• Ease of Use: Simple application with heat press; pre-cut options.
• Satisfaction Guaranteed: Quality-focused with customer satisfaction at the core.

NINJA TRANSFER DTF ORDER PROCESS

1. Upload Your Designs and Place Order Online. Enjoy the freedom to use designs with unlimited colors, whether they are simple or highly detailed. Just upload any design, and your artwork will be transformed into a high-quality Direct to Film (DTF) transfer.
2. Printed & Shipped within 24-48 Hours. Your artwork will be transformed using our unique DTF transfer process, ensuring the most detailed and highest quality full-color direct to film transfers available.
3. Heat press when Ready. Keep Extras in Storage Forever. Press your DTF transfers at 320°F with medium pressure for 12-15 seconds. Allow them to cool for 15 seconds before peeling, and then press again to ensure ultimate durability.

TRANSFER INSTRUCTIONS

To ensure your Ninja DTF transfer looks professionally pressed every time, follow these five simple steps.

1. No Need To Pre-Press Or Pre-Iron: Removing moisture is unnecessary. Only do a prepress if you so desire.
2. Position Your Design: Take your time to line up your transfer in the desired location on your item. Normally, there is no need to use heat-resistant tape on flat heat presses to keep your design in place, however it is highly recommended when pressing transfers onto hats or when using an iron to keep the transfer in place. You’ll get a feel for when this is needed. 
3. Press: Press your transfer with medium pressure at 310°F / 155°C for 15 seconds. You cannot damage the transfer by pressing with more heat, pressure, or time -- within reason. However, too much heat can damage your garment, so test first and use parchment paper or a protective guard sheet to protect your garment from a direct iron.
4. Let It Cool. Then Peel It: After pressing, let your transfer rest until it is cool to the touch (minimum of 15-30 seconds). Once cool, lift the transfer from one corner and gently peel back. This ensures every piece of your design is adhering to your item. If not, stop peeling, lay it back down, and trouble shoot as follows -- (1.) If some or all of the design does not transfer AND it was cool when peeling, it means there was not enough heat, pressure, or time. Press your transfer again with more pressure and time first (+5-10 seconds). (2.) If that doesn’t work, try 15°F heat increments until you find the sweet spot. You truly cannot damage the transfer by pressing multiple times.
5. Final Press & Wash Instructions: Place the parchment paper or a single layer of t-shirt material over the design and press again for 15 seconds to soften the design, increase durability, and remove shine. If you want a shiny finish, cover with a protective guard sheet for the final press. When washing, flip shirt inside out, wash on cold and dry using low heat or hang.