Green Galaxy Water-Based Ink Kit
FREE SHIPPING
All supplies in orders over $275 ship for free. Orders below $275 ship for $15. Orders placed before 3pm local time typically ship the same day.
FLAT RATE SHIPPING
Flat rate shipping charges will be assigned to our Equipment and heavier consumable items. View our entire FREE Shipping Policy
GROUND SHIPPING ZONES
If you need clarity on estimated shipping to your area please chat with us or call us at 1-800-314-6390
Have you ever embroidered on fluffy materials like stockings, Sherpa, or other plush fabrics? If so, you’ve probably seen your stitches disappear right into the fluff. Don’t worry! This guide shows you...
Crafting 3D ornaments with a laser engraver, like the xTool, is a fun way to create stunning decorations that pop with depth and detail. But if you’ve ever tried assembling these...
In this new episode of Deep Dive with Colin, we’re diving into oversized printing with a Christmas twist! We’ll walk you through the highs, lows, and lessons learned while printing...
Wilflex Epic Bolt LC White has become our go-to white ink due to its low-temperature cure requirements, excellent printability, high bleed resistance, opacity, and soft hand feel. The key to...
The “Let’s Talk Shop” podcast is full of amazing stories from creative people in the screen printing world. Each episode dives into how they turned ideas into thriving businesses. Whether...
Your embroidery machine is a powerhouse, but even the best machines need a little TLC when a needle snaps or wears out. The good news? Changing a needle is quick and simple...
Vinyl is a fantastic tool for any screen printer or apparel decorator looking to expand their creative possibilities. Whether you’re creating custom t-shirts, hats, or promotional items, heat transfer vinyl...
Allmade Apparel, an eco-friendly apparel company created by printers for printers, is excited to announce the release of its Decoration Recommendations Guide—an essential resource crafted to make your decoration process...
After traversing every corner of the Green Galaxy, we've collected the best and most valuable hues into one water-based ink kit. Sustainable, friendly to both printer and planet, and economically priced, Green Galaxy inks are taking the universe by storm. Now you can take home all the colors of the universe. The kit includes 14 water-based Green Galaxy inks.
Quart kits will have quarts of the colors whereas gallon kits will contain gallons of the following colors:
Ready-to-use print water-based ink for printing on light or dark cotton and other non-dye-migrating fabrics. Can be printed on dark polyester or dye-migrating fabrics with the use of a compatible low-cure catalyst.
Can be used with any mesh between 110-305.
We recommend using a water-resistant emulsion like Baselayr Complete. It is recommended to degrease your screens with Baselayr Emulsion Prep. For extended screen life and long print runs it is recommended to post-expose the screens and/or use an emulsion hardener like Baselayr Emulsion Hardener.
This product can be mixed with transparent and covering ink from the AB series.
Load the screen with plenty of ink. Flood screen prior to printing. Green Galaxy ink can be printed with a push or pull squeegee stroke. After printing, the flood screen allows ink to sit on top of the image to avoid drying. If the screen clogs or exhibits dry ink in the print, re-flood, and aggressively prints again, this should clear the screen. If it does not clear the screen, spray a small amount of warm water into the stuck areas of the screen and wipe it out with a rag. If you are leaving your screen for an extended period of time be sure to leave your screen flooded completely. If your ink begins to scale over, spray with water to rewet the ink.
For flashing, forced air flash is optimal. Flash until dry to the touch.
Printed fabric should be cured for a minimum of 90 seconds at 360°F. Ideally, the printed fabric should be cured for three minutes at 300–320°F.
After printing, perform a stretch test to ensure elasticity. It is always recommended to perform a wash test to ensure proper cure prior to going into production. You may also run abrasion testing to watch for flaking and test adhesion. Increase cure dwell time if testing fails.
Ink should be removed from the screen as soon as printing is completed. General wash-up (on ink that has not dried) can be done with water, though using Aqua Wash is much easier and recommended. For aggressive or dried screens, use Aqua Wash to dissolve the ink and blast out areas of stuck ink with water pressure.
Keep container(s) tightly closed. Store in a cool, well-ventilated location that is locked.
Do not breathe vapors. Wear protective gloves. Do not eat, drink or smoke when using the product. Wash hands thoroughly after handling. Dispose of this product in accordance with local, regional, national, and international regulations as specified.
Size
