Use Code: BFCM20 & Save $20 Off Your Order Over $200+

Free Shipping in the Contiguous US Learn More

Use Code: NINJA & Save 20% Off Your First Order Of Transfers

SAVE $20 ON ORDERS OF $200+

BFCM20
USE CODE: BFCM20

FN-INK™ Metallic Gold Ink

FN-INK  |  SKU: IKPL-FNGOLDMET-P
us-dollar
Use Code: BFCM20, BFCM40, BFCM60
Save $20/40/60 Off Your Order Above $200/400/600 | Valid Only On Select Products Thru 12/01
spam
FN-INK OUTAGE
Due to the current outage, we are offering a 20% discount on Wilflex inks through 11/30. Use code WILFLEX2024.
Size
$35.95
0.58 lb
Flat rate
multi-qty message
In stock
DESCRIPTION

Make a print shimmer with FN-INK™ Metallic Gold. It’s a low cure metallic ink that can be printed directly to fabric, printed over an underbase, and mixed with other colors.

FN-INK™ Metallic Gold is a low cure ink. However, the flakes will reflect heat when cured in an electric dryer, which slows down the cure process. Proper wash testing should be performed to ensure cure parameters are optimal before running any production.

FN-INK™ Metallic Gold is not a low bleed ink. If printing on a poly or poly blended garment, please consider using a low bleed underbase.

Unlock specialty printing today with FN-INK™ Metallic Gold. 

>> VIEW THE DIGITAL COLOR CARD HERE <<

FEATURES
  • Vibrant & glittery 
  • Easy to work with
  • Soft hand prints
  • Can mix with other colors
BENEFITS
  • FN-INK™ Metallic Gold can be printed on its own or mixed with other colors, so printers can add a sparkling effect to any print.
  • The metallic ink maintains the soft-hand feel printers have loved with the FN-INK™ line.
  • It's a vibrant, glimmering ink that'll make a print stand out from the rest.
RECOMMENDATION FOR USE

Printing direct to fabric: Lower mesh counts will be best if printing FN-INK™ Metallic Gold directly to fabric. 86 or 110 mesh is recommended, but printers can go up to 156 standard mesh if needed. If using thin thread mesh, 110-156 mesh will work great.

If you are printing over a base white or another color: Use 156 mesh or higher to better control the ink deposit. If using thin thread, you can print through up to 230 mesh.

Some designs will require the use of higher mesh counts. Do not exceed 230 thin thread mesh screens. It is recommended to print FN-INK™ Metallic Gold over either a clear or color underbase or a white base. A white base will give the gold a brighter appearance.

Adding color to gold: There is no limit on how much ink you can add to FN-INK™ Metallic Gold. You can add 10%-20% of a color to gold to give it a tint. You can also add the gold to a color at 10%-20% to create a slight sparkle effect. For example, adding 20% of gold to Black FN-INK™ creates a subtle, shimmery effect that works well as a background color.

All gold flake inks will introduce a gold color value (a red, yellow, black tint) to the ink. As a result, not all colors will look the way you may want or expect. For example, adding Bright Red to Gold at 20% will create a brown shade of ink. While it is suggested to use complimentary colors when tinting FN-INK™ Metallic Gold, the ratios may need to be adjusted to match expectations. Test new colors thoroughly before starting production.

*Some colors are inherently translucent and any addition of a clear additive will create a loss of opacity or coverage.

STENCIL & EMULSION GUIDELINES

Any emulsion works with FN-INK™ Metallic Gold. 

Mesh Counts for Direct to Fabric

  • Standard Mesh: 86-156
  • Thin Thread: 110-156 (Thin thread will look and print the best.)

Mesh Counts for Over an Underbase

  • Standard Mesh: 156-180
  • Thin Thread: 156-230 (Thin thread mesh will look and print best.)
MIXING

Be sure to stir the product prior to use. Stir thoroughly. Print and perform a wash test before production.

MODIFYING

The ink is ready to print right out of the container, no modification is necessary. If desired, you can modify it with a curable reducer at up to 5% by weight. If greater stretch is required for troublesome garments, add FN-INK™ Stretch starting at 5%. Add more if greater stretch is desired.

PRINTING 

Use a 70 durometer or a 65/90/65 squeegee blade to produce an even print with enough flake deposit. Using a blade that is too soft will not properly shear the ink. A squeegee with a stiffer, harder blade will shear a thinner ink deposit.

When possible, do a flood print. The flood stroke will pre-fill the stencil and make it easier to fully clear the ink and flake from the screen. It’ll make a smoother ink deposit.

CURING

Even though FN-INK™ Gold is a low cure ink, it can reflect heat in electric dryers, which means the metallic ink takes longer to cure compared to the classic line of FN-INK™. Increase the dwell time (retention time in the conveyor dryer) or the temperature to ensure the ink reaches full cure. 

TESTING & PRECAUTIONS

When testing cured ink, perform a wash test to ensure proper cure prior to going into production. If the gold prompts any issues after a wash test, then the metallic ink did not reach full cure.

CLEAN UP

Use any press wash to clean it up.

STORAGE

Keep container(s) tightly closed. Store in a cool, well-ventilated location out of direct sunlight.

PRODUCT DATA SHEETS

Usage Sheet

Technical Data Sheet

Safety Data Sheet

FREE GROUND SHIPPING (SUPPLIES ONLY)

FREE SHIPPING

All supplies in orders over $275 ship for free. Orders below $275 ship for $15. Orders placed before 3pm local time typically ship the same day.

FLAT RATE SHIPPING

Flat rate shipping charges will be assigned to our Equipment and heavier consumable items. View our entire FREE Shipping Policy

GROUND SHIPPING ZONES

UPS Ground Shipping Zones

If you need clarity on estimated shipping to your area please chat with us or call us at 1-800-314-6390

POPULAR PRODUCTS

VIEW MORE
Riley Hopkins 360 screen printing press set up with multiple screens in vibrant colors, ready for multi-color printing. A printed shirt with a detailed, colorful design is positioned on the platen, showcasing the precision and versatility of the screen printing process.

RILEY HOPKINS

MANUAL PRESSES

SHOP THE COLLECTION
Person holding a scoop coater filled with bright blue emulsion, positioned next to a screen ready for coating. The setup highlights the preparation stage of screen printing, where precision and even coverage are key for creating quality stencils.

INDUSTRY LEADING

EMULSIONS

BUY NOW

PLASTISOL INK

MIXING SYSTEMS

GRAB YOURS
Screen exposure unit with a glowing orange and blue light, holding a screen and Baselayr output film in place. The darkroom setup emphasizes the precision and technology used to create sharp, detailed stencils for screen printing.

BASELAYR

LED EXPOSURE UNITS

ORDER NOW

THINGS YOU SHOULD KNOW

View all
FN-INK™ Metallic Gold Ink Quart | Screenprinting.com
FN-INK

FN-INK™ Metallic Gold Ink

From $35.95

Make a print shimmer with FN-INK™ Metallic Gold. It’s a low cure metallic ink that can be printed directly to fabric, printed over an underbase, and mixed with other colors.

FN-INK™ Metallic Gold is a low cure ink. However, the flakes will reflect heat when cured in an electric dryer, which slows down the cure process. Proper wash testing should be performed to ensure cure parameters are optimal before running any production.

FN-INK™ Metallic Gold is not a low bleed ink. If printing on a poly or poly blended garment, please consider using a low bleed underbase.

Unlock specialty printing today with FN-INK™ Metallic Gold. 

>> VIEW THE DIGITAL COLOR CARD HERE <<

FEATURES

BENEFITS

RECOMMENDATION FOR USE

Printing direct to fabric: Lower mesh counts will be best if printing FN-INK™ Metallic Gold directly to fabric. 86 or 110 mesh is recommended, but printers can go up to 156 standard mesh if needed. If using thin thread mesh, 110-156 mesh will work great.

If you are printing over a base white or another color: Use 156 mesh or higher to better control the ink deposit. If using thin thread, you can print through up to 230 mesh.

Some designs will require the use of higher mesh counts. Do not exceed 230 thin thread mesh screens. It is recommended to print FN-INK™ Metallic Gold over either a clear or color underbase or a white base. A white base will give the gold a brighter appearance.

Adding color to gold: There is no limit on how much ink you can add to FN-INK™ Metallic Gold. You can add 10%-20% of a color to gold to give it a tint. You can also add the gold to a color at 10%-20% to create a slight sparkle effect. For example, adding 20% of gold to Black FN-INK™ creates a subtle, shimmery effect that works well as a background color.

All gold flake inks will introduce a gold color value (a red, yellow, black tint) to the ink. As a result, not all colors will look the way you may want or expect. For example, adding Bright Red to Gold at 20% will create a brown shade of ink. While it is suggested to use complimentary colors when tinting FN-INK™ Metallic Gold, the ratios may need to be adjusted to match expectations. Test new colors thoroughly before starting production.

*Some colors are inherently translucent and any addition of a clear additive will create a loss of opacity or coverage.

STENCIL & EMULSION GUIDELINES

Any emulsion works with FN-INK™ Metallic Gold. 

Mesh Counts for Direct to Fabric

Mesh Counts for Over an Underbase

MIXING

Be sure to stir the product prior to use. Stir thoroughly. Print and perform a wash test before production.

MODIFYING

The ink is ready to print right out of the container, no modification is necessary. If desired, you can modify it with a curable reducer at up to 5% by weight. If greater stretch is required for troublesome garments, add FN-INK™ Stretch starting at 5%. Add more if greater stretch is desired.

PRINTING 

Use a 70 durometer or a 65/90/65 squeegee blade to produce an even print with enough flake deposit. Using a blade that is too soft will not properly shear the ink. A squeegee with a stiffer, harder blade will shear a thinner ink deposit.

When possible, do a flood print. The flood stroke will pre-fill the stencil and make it easier to fully clear the ink and flake from the screen. It’ll make a smoother ink deposit.

CURING

Even though FN-INK™ Gold is a low cure ink, it can reflect heat in electric dryers, which means the metallic ink takes longer to cure compared to the classic line of FN-INK™. Increase the dwell time (retention time in the conveyor dryer) or the temperature to ensure the ink reaches full cure. 

TESTING & PRECAUTIONS

When testing cured ink, perform a wash test to ensure proper cure prior to going into production. If the gold prompts any issues after a wash test, then the metallic ink did not reach full cure.

CLEAN UP

Use any press wash to clean it up.

STORAGE

Keep container(s) tightly closed. Store in a cool, well-ventilated location out of direct sunlight.

PRODUCT DATA SHEETS

Usage Sheet

Technical Data Sheet

Safety Data Sheet

Size

  • Pint
  • Quart
  • Gallon
  • 5 Gallon
View product

TOP-TIER SERVICE
Back to top