Use Code: BFCM20 & Save $20 Off Your Order Over $200+

Free Shipping in the Contiguous US Learn More

Use Code: NINJA & Save 20% Off Your First Order Of Transfers

SAVE $20 ON ORDERS OF $200+

BFCM20
USE CODE: BFCM20

Sgreen Stripper Emulsion Remover

Sgreen  |  SKU: CMEV-SF-SES-Q
us-dollar
Use Code: BFCM20, BFCM40, BFCM60
Save $20/40/60 Off Your Order Above $200/400/600 | Valid Only On Select Products Thru 12/01
Size
$25.95
2.35 lb
Flat rate
multi-qty message
In stock
DESCRIPTION

Sgreen® Emulsion Stripper is an environmentally conscious, Eco-Friendlier™ emulsion stripper, specifically formulated to cut through oils and to degrade and remove emulsion quickly. Use the chemical as is, in a diluted form, or in a Dunk Tank. SGREEN® STRIPPER will economically and safely remove all types of photopolymer, diazo, and capillary film emulsions without etching.

CHECK OUT THE SGREEN PRODUCT CATALOG

*This item cannot ship via Air, must ship Ground*

BENEFITS
  • Eco-friendly chemicals that are safer for a printer's health, pipes, and environment.
  • Powerful chemistry that can clean up the messiest jobs just as well (if not better) than industrial chemicals.
  • Citrus formula allows for easy breathing.
DARKROOM USE

This product is concentrated. For all spray applications, you may add up to 50% water. Adding water can diminish the effectiveness of the product.

  1. Spray or pour a small amount onto the screen.
  2. Scrub in a circular motion with a dedicated scrub pad or soft to medium bristle nylon brush on the front and back of the screen until you have fully agitated the stencil and you start to see it soften.
  3. Let the product set and work for 30 seconds or more. If you have thicker stencils or are using lower mesh counts, you may need to scrub both sides again. NOTE: DO NOT LET PRODUCT DRY ON SCREEN.
  4. Pressure wash the stencil away from the T-shirt side of the screen. Possible de-lamination of the mesh from static frames may occur if pressure washing from the squeegee side.
  5. Follow up with either Haze Remover, Degreaser, or Sgreen® Stuff as needed.
DUNK TANK INSTRUCTIONS
  1. If you're refilling a dip tank, make sure the tank is clean of any residue from old emulsion and chemicals.
  2. Fill with water first — approximately 27 gallons
  3. Add 3 gallons of Sgreen® Emulsion Stripper. Adding the chemical after the water keeps the foaming to a minimum.
  4. Put in screens to be reclaimed. Wait between 2 and 5 minutes before reclaiming.
  5. It is recommended to use a pressure washer to remove the dissolved stencil, but a high pressure hose attachment will do well.
  6. Thicker stencils will take longer for the active ingredients to break down the emulsion. Thinner stencils will break down quickly.
    STORAGE INFORMATION

    Store away from direct sunlight and heat. Do not freeze.

    GENERAL SAFETY PRECAUTIONS
    • Keep out of the reach of children.
    • Mild acidic material.
    • Do not take internally.
    • Avoid contact with eyes.
    • Wash thoroughly after handling.
    FIRST AID:

    Eyes: Flush for 15 minutes, seek medical attention if irritation persists.

    Swallowed: Drink large quantities of water and get immediate medical attention.

    Skin: Wash with soap and water, seek medical attention if irritation occurs.

    Inhalation: Remove person to fresh air and keep comfortable for breathing. Call a doctor/physician if you feel unwell.

    *** See SDS Sheet for more details

    FOR INDUSTRIAL USE ONLY

    PRODUCT DATA SHEETS
    FREE GROUND SHIPPING (SUPPLIES ONLY)

    FREE SHIPPING

    All supplies in orders over $275 ship for free. Orders below $275 ship for $15. Orders placed before 3pm local time typically ship the same day.

    FLAT RATE SHIPPING

    Flat rate shipping charges will be assigned to our Equipment and heavier consumable items. View our entire FREE Shipping Policy

    GROUND SHIPPING ZONES

    UPS Ground Shipping Zones

    If you need clarity on estimated shipping to your area please chat with us or call us at 1-800-314-6390

    POPULAR PRODUCTS

    VIEW MORE
    Riley Hopkins 360 screen printing press set up with multiple screens in vibrant colors, ready for multi-color printing. A printed shirt with a detailed, colorful design is positioned on the platen, showcasing the precision and versatility of the screen printing process.

    RILEY HOPKINS

    MANUAL PRESSES

    SHOP THE COLLECTION
    Person holding a scoop coater filled with bright blue emulsion, positioned next to a screen ready for coating. The setup highlights the preparation stage of screen printing, where precision and even coverage are key for creating quality stencils.

    INDUSTRY LEADING

    EMULSIONS

    BUY NOW

    PLASTISOL INK

    MIXING SYSTEMS

    GRAB YOURS
    Screen exposure unit with a glowing orange and blue light, holding a screen and Baselayr output film in place. The darkroom setup emphasizes the precision and technology used to create sharp, detailed stencils for screen printing.

    BASELAYR

    LED EXPOSURE UNITS

    ORDER NOW

    THINGS YOU SHOULD KNOW

    View all
    Sgreen Stripper Emulsion Remover by Franmar Quart | Screenprinting.com
    Sgreen

    Sgreen Stripper Emulsion Remover

    From $25.95

    Sgreen® Emulsion Stripper is an environmentally conscious, Eco-Friendlier™ emulsion stripper, specifically formulated to cut through oils and to degrade and remove emulsion quickly. Use the chemical as is, in a diluted form, or in a Dunk Tank. SGREEN® STRIPPER will economically and safely remove all types of photopolymer, diazo, and capillary film emulsions without etching.

    CHECK OUT THE SGREEN PRODUCT CATALOG

    *This item cannot ship via Air, must ship Ground*

    BENEFITS

    DARKROOM USE

    This product is concentrated. For all spray applications, you may add up to 50% water. Adding water can diminish the effectiveness of the product.

    1. Spray or pour a small amount onto the screen.
    2. Scrub in a circular motion with a dedicated scrub pad or soft to medium bristle nylon brush on the front and back of the screen until you have fully agitated the stencil and you start to see it soften.
    3. Let the product set and work for 30 seconds or more. If you have thicker stencils or are using lower mesh counts, you may need to scrub both sides again. NOTE: DO NOT LET PRODUCT DRY ON SCREEN.
    4. Pressure wash the stencil away from the T-shirt side of the screen. Possible de-lamination of the mesh from static frames may occur if pressure washing from the squeegee side.
    5. Follow up with either Haze Remover, Degreaser, or Sgreen® Stuff as needed.

    DUNK TANK INSTRUCTIONS

    1. If you're refilling a dip tank, make sure the tank is clean of any residue from old emulsion and chemicals.
    2. Fill with water first — approximately 27 gallons
    3. Add 3 gallons of Sgreen® Emulsion Stripper. Adding the chemical after the water keeps the foaming to a minimum.
    4. Put in screens to be reclaimed. Wait between 2 and 5 minutes before reclaiming.
    5. It is recommended to use a pressure washer to remove the dissolved stencil, but a high pressure hose attachment will do well.
    6. Thicker stencils will take longer for the active ingredients to break down the emulsion. Thinner stencils will break down quickly.

      STORAGE INFORMATION

      Store away from direct sunlight and heat. Do not freeze.

      GENERAL SAFETY PRECAUTIONS

      FIRST AID:

      Eyes: Flush for 15 minutes, seek medical attention if irritation persists.

      Swallowed: Drink large quantities of water and get immediate medical attention.

      Skin: Wash with soap and water, seek medical attention if irritation occurs.

      Inhalation: Remove person to fresh air and keep comfortable for breathing. Call a doctor/physician if you feel unwell.

      *** See SDS Sheet for more details

      FOR INDUSTRIAL USE ONLY

      PRODUCT DATA SHEETS

      Size

      • Quart
      • Gallon
      • 5 Gallon
      View product

      TOP-TIER SERVICE
      Back to top