Use Code: BFCM20 & Save $20 Off Your Order Over $200+

Free Shipping in the Contiguous US Learn More

Use Code: NINJA & Save 20% Off Your First Order Of Transfers

SAVE $20 ON ORDERS OF $200+

BFCM20
USE CODE: BFCM20

Wilflex Epic Rio Aquamarine Plastisol Ink (Mixing Component)

Wilflex  |  SKU: IKPL-RIOMIX-AQUA-Q
us-dollar
Use Code: BFCM20
Save $20 Off Your Order Above $200 | Valid Only On Select Products Thru 12/01
Size
$36.67
1.81 lb
Flat rate
multi-qty message
In stock
DESCRIPTION

WILFLEX™ Epic Rio Aquamarine Plastisol Ink is a low-cure non-phthalate finished ink mixing system formulated for a perfect balance of color accuracy and opacity for peak press performance and color design. It is an easy-to-use color mixing system with 18 inter-mixable colors, enabling printers to produce accurate PANTONE® simulations. EPIC RIO MIX is the most opaque color system in the line of Wilflex mixing color systems. Its opacity helps printers get to color quicker even when using fine mesh screens, saving ink and money.

Epic Rio Aquamarine is a clean blue with a slight red undertone.

Note: The mixing system software is only compatible with PC-based systems. For Mac and/or Smartphone users, please visit the mixing website (be aware that you will need to register and be approved before having access to the mixing system and compliance information).

FEATURES
  • Accurate and vibrant Pantone Color Simulations
  • PANTONE® approved
  • Excellent color reproduction over bases and white, light garments
  • Matte finish
  • Easy and accurate color mixing with finished inks that are balanced for viscosity
  • Creamy inks that perform on both manual and automatic presses
  • Best color fastness to crocking test 
  • Wet-on-wet printing capabilities at high production speeds with good resistance to build-up
  • Consistent across short runs, long runs, color-to-color, and batch-to-batch
  • Low cure properties (260°F–280°F)
  • Soft-hand prints
ARTWORK

Choke the underbase: Creating a choke of 0.5 pts will allow the printer to use less pressure on the over-print colors, minimizing ink splitting and mottling.

Butt-to-butt separations: This technique keeps the ink from blurring on sharp line color transitions to avoid the urge of flashing during the rotation. Avoid trapping colors in the artwork.

Minimal to no white within design: Underbase behind dark colors. 

Plan the print rotation: Two general rules to follow when deciding on print rotation: 

  • Print the smallest image area to largest image area or less important colors before more important colors. 
  • On light fabrics, print light colors to dark colors. On dark fabrics, print dark colors to light colors when using an under-base. Plan the color overlays based on this information.
DETAILS

SCREEN CREATION

Wilflex Epic Rio works with 110-305 mesh counts. Ideal screen tension should be 25-35 n/cm2.

When coating the screen with emulsion, it’s recommended to follow the 2x2 method where the emulsion over mesh is 15-20%. Coating techniques may vary depending on the design and desired print outcome. Test and confirm with client before going into production.

FABRIC TYPES

Wilflex Epic Rio best performs on 100% cotton, 100% polyester, triblends, polyester blends, cotton/poly blends, and cotton/lycra blends.  Use a Low Bleed white or Poly white as needed to fight dye migration. When printing on 100% polyester, a dye blocker base may be needed to prevent dye migration. 

PRINTING

For single-color prints, colors will reproduce best over white or light-colored fabrics or a single white underbase on dark substrates. When printing directly on dark garments, print-flash-print using lower mesh screens.

Use a squeegee with a durometer of 60/90/60, 70/90/70, or any squeegee between 60 and 90 durometer. When printing, angle the squeegee by 10-15% and use a medium to fast stroke with a medium flood. 

WET-ON-WET PRINTING

When printing wet-on-wet, the ink will always transfer to the back of the screen. A good ink will remain wet on the back of the screen. This small amount of wet build-up is actually beneficial for ink coverage and color intensity in wet-on-wet printing. 

CURING INSTRUCTIONS
  • Flash at 220°F (105°C) for 3 - 5 seconds
  • Cure at 266°F - 320°F (130°C - 160°C)
  • Adjust flash temperature and dwell time so the ink is just dry to the touch. Depending on the flash unit, a 2 - 3 second flash could be adequate. 
  • Curing is a time and temperature process, a lower oven temperature setting with a slower belt speed while maintaining recommended ink cure temperature is always best to protect fabric, control dye migration, and reduce energy consumption.
CLEAN UP
STORAGE INFORMATION

Store at 65-90°F (18-32°C). Avoid direct sunlight. Use within one year of the the receipt.

PRODUCT DATA SHEETS
WEIGHT VS FILL LINE

Wilflex ink is measured by weight in lbs in the container vs. using a fill line. Please keep this in mind if your ink container looks less than full.

FREE GROUND SHIPPING (SUPPLIES ONLY)

FREE SHIPPING

All supplies in orders over $275 ship for free. Orders below $275 ship for $15. Orders placed before 3pm local time typically ship the same day.

FLAT RATE SHIPPING

Flat rate shipping charges will be assigned to our Equipment and heavier consumable items. View our entire FREE Shipping Policy

GROUND SHIPPING ZONES

UPS Ground Shipping Zones

If you need clarity on estimated shipping to your area please chat with us or call us at 1-800-314-6390

POPULAR PRODUCTS

VIEW MORE
Riley Hopkins 360 screen printing press set up with multiple screens in vibrant colors, ready for multi-color printing. A printed shirt with a detailed, colorful design is positioned on the platen, showcasing the precision and versatility of the screen printing process.

RILEY HOPKINS

MANUAL PRESSES

SHOP THE COLLECTION
Person holding a scoop coater filled with bright blue emulsion, positioned next to a screen ready for coating. The setup highlights the preparation stage of screen printing, where precision and even coverage are key for creating quality stencils.

INDUSTRY LEADING

EMULSIONS

BUY NOW

PLASTISOL INK

MIXING SYSTEMS

GRAB YOURS
Screen exposure unit with a glowing orange and blue light, holding a screen and Baselayr output film in place. The darkroom setup emphasizes the precision and technology used to create sharp, detailed stencils for screen printing.

BASELAYR

LED EXPOSURE UNITS

ORDER NOW

THINGS YOU SHOULD KNOW

View all
Wilflex Epic Rio Aquamarine Plastisol Ink (Mixing Component) | Screenprinting.com
Wilflex

Wilflex Epic Rio Aquamarine Plastisol Ink (Mixing Component)

From $36.67

WILFLEX™ Epic Rio Aquamarine Plastisol Ink is a low-cure non-phthalate finished ink mixing system formulated for a perfect balance of color accuracy and opacity for peak press performance and color design. It is an easy-to-use color mixing system with 18 inter-mixable colors, enabling printers to produce accurate PANTONE® simulations. EPIC RIO MIX is the most opaque color system in the line of Wilflex mixing color systems. Its opacity helps printers get to color quicker even when using fine mesh screens, saving ink and money.

Epic Rio Aquamarine is a clean blue with a slight red undertone.

Note: The mixing system software is only compatible with PC-based systems. For Mac and/or Smartphone users, please visit the mixing website (be aware that you will need to register and be approved before having access to the mixing system and compliance information).

FEATURES

ARTWORK

Choke the underbase: Creating a choke of 0.5 pts will allow the printer to use less pressure on the over-print colors, minimizing ink splitting and mottling.

Butt-to-butt separations: This technique keeps the ink from blurring on sharp line color transitions to avoid the urge of flashing during the rotation. Avoid trapping colors in the artwork.

Minimal to no white within design: Underbase behind dark colors. 

Plan the print rotation: Two general rules to follow when deciding on print rotation: 

DETAILS

SCREEN CREATION

Wilflex Epic Rio works with 110-305 mesh counts. Ideal screen tension should be 25-35 n/cm2.

When coating the screen with emulsion, it’s recommended to follow the 2x2 method where the emulsion over mesh is 15-20%. Coating techniques may vary depending on the design and desired print outcome. Test and confirm with client before going into production.

FABRIC TYPES

Wilflex Epic Rio best performs on 100% cotton, 100% polyester, triblends, polyester blends, cotton/poly blends, and cotton/lycra blends.  Use a Low Bleed white or Poly white as needed to fight dye migration. When printing on 100% polyester, a dye blocker base may be needed to prevent dye migration. 

PRINTING

For single-color prints, colors will reproduce best over white or light-colored fabrics or a single white underbase on dark substrates. When printing directly on dark garments, print-flash-print using lower mesh screens.

Use a squeegee with a durometer of 60/90/60, 70/90/70, or any squeegee between 60 and 90 durometer. When printing, angle the squeegee by 10-15% and use a medium to fast stroke with a medium flood. 

WET-ON-WET PRINTING

When printing wet-on-wet, the ink will always transfer to the back of the screen. A good ink will remain wet on the back of the screen. This small amount of wet build-up is actually beneficial for ink coverage and color intensity in wet-on-wet printing. 

CURING INSTRUCTIONS

CLEAN UP

STORAGE INFORMATION

Store at 65-90°F (18-32°C). Avoid direct sunlight. Use within one year of the the receipt.

PRODUCT DATA SHEETS

Size

  • Quart
  • Gallon
View product

TOP-TIER SERVICE
Back to top