While many screen printers and designers are familiar with preparing vector art for printing, dealing with pixel-based files in Photoshop requires a different skill set. This Deep Dive Colin will walk you through everything you need to know about getting your designs Direct to Film (DTF) ready, even if you’re starting with a less-than-perfect JPEG.
FILE PREP MATTERS FOR DTF PRINTING
When it comes to DTF, having a clean, high-quality file directly impacts your print results. Unlike traditional printing methods, DTF relies on a combination of vibrant ink layers and a thin adhesive to achieve a soft and durable print. Improper file prep can lead to unwanted halos, pixelated edges, and inaccurate colors, which you definitely don’t want to show up on a finished shirt.
So, let’s break down how to take your art from basic to pro in Photoshop, step-by-step.
STEP 1: START WITH HIGH RESOLUTION
The first rule for any print-ready design is starting with a high-resolution file. Always aim for 300 DPI (Dots Per Inch) and ensure that your artwork is set at its final print size. If your image is scaled up or down after creation, it can result in blurry, low-quality prints. Here’s how to check and set your resolution:
- Open your design in Photoshop.
- Go to Image > Image Size.
- Make sure your resolution is set to 300 DPI, and adjust your dimensions to match the desired print size.
If you’re working with a low-res image (like a 72 DPI file from the web), try upscaling using tools like Photoshop’s Preserve Details 2.0 feature, but keep in mind that quality can only be improved so much.
RELATED: DTG VS DTF PRINTING - A COMPREHENSIVE COMPARISON
STEP 2: CONVERT RGB TO CMYK
Color accuracy can be a major headache for print. RGB, the default color mode for screens, often won’t look the same when printed on fabric, especially when converted to CMYK (used for printing). Converting your image early ensures that your colors are dialed in for print right from the start.
- Use the Info Window (Window > Info) to spot-check your colors and see if they’re within the CMYK range. If an exclamation point appears next to the CMYK values, you’ve got an out-of-gamut color that could shift when printed.
- Go to Image > Mode > CMYK Color.
- Visually confirm that any color shift is ok or make adjustments.
STEP 3: REMOVE BACKGROUNDS FOR TRANSPARENT PRINTS
One of the most critical steps in prepping (DTF) files is knocking out the background cleanly. DTF prints usually require a transparent background so that only your design shows up on the shirt, without an unsightly box of white or any unwanted colors around it. Here’s the quick and effective way to handle it:
- Select the Magic Wand Tool (shortcut W).
- Set the tolerance between 20-50 and turn off anti-aliasing for sharper edges.
- Click on the background areas you want to remove.
- Hit Delete to reveal transparency. You should see a gray and white checkerboard pattern behind your art.
If your image has soft edges or intricate details, consider using the Select and Mask feature to refine your selections further.
RELATED: PREPPING VECTOR ART FOR DTF
STEP 4: CLEAN UP THOSE EDGES
After removing the background, you might notice some rough, pixelated edges. This is where edge refinement comes in handy:
- With your selection still active, go to Select > Modify > Expand and choose 1-2 pixels.
- Click Delete again to remove any stray pixels.
- If the edges still look jagged, manually going in with the Eraser Tool or even redrawing parts of the design may be necessary.
- Depending on your artwork, try using the Stroke effect (Layer > Layer Style > Stroke) to cover up any imperfections.
STEP 5: OPTIMIZE COLORS & CONTRAST
When prepping artwork for DTF, having rich blacks and bright whites can make a world of difference. Poor contrast can result in washed-out prints, so spend some time dialing in your levels:
- Go to Image > Adjustments > Curves or Levels.
- Bring up the shadows to deepen blacks and push the highlights to pure white.
- Check your color balance using the Info Window to ensure your colors are correct.
- If your file still has unwanted color casts or artifacts (common with JPEGs), a quick pass with Hue/Saturation (Image > Adjustments > Hue/Saturation) can help neutralize the image.
STEP 6: HALFTONES & FADES FOR COMPLEX DESIGNS
For complex photographic designs or artwork with a lot of gradients, create a halftone fade knockout. This ensures you still have the fade effect and the halftones allow it to print onto the film correctly. Once you have the mask created, turn it into halftones. To create a halftone pattern:
- Duplicate the layer into a new image
- Convert your image to grayscale (Image > Mode > Grayscale).
- Next, go to Image > Mode > Bitmap.
- Choose a Lines Per Inch (LPI) setting between 25-35 for best results and select Round Dot for the shape. Choose an angle that is pleasing to your eye.
When applied correctly, halftones allow smooth transitions and fades, making the final print look much more polished.
RELATED: HOW TO CREATE TONAL PRINTS
STEP 7: EXPORT AS TRANSPARENT PNG
When your artwork is ready, it’s time to export! PNG is the format of choice for DTF printing due to its support for transparency. Make sure to double-check your file for any missed areas or rough spots before finalizing.
- Go to File > Export > Export As.
- Select PNG and make sure transparency is enabled.
- Save your file at 300 DPI.
STEP 8: TEST PRINT & ADJUST AS NEEDED
Before running a full production print, always do a test transfer. Check for any issues like fuzzy edges, color shifts, or unwanted artifacts. If something doesn’t look right, revisit the Photoshop file and make tweaks until it’s perfect.
FINAL THOUGHTS
Prepping your art for DTF printing in Photoshop may seem daunting, but mastering these skills will save you time, money, and frustration down the line. Proper file prep means crisper prints, more vibrant colors, and a product you can confidently show off to your clients.