Use Code: BFCM20 & Save $20 Off Your Order Over $200+

Free Shipping in the Contiguous US Learn More

Use Code: NINJA & Save 20% Off Your First Order Of Transfers

SAVE $20 ON ORDERS OF $200+

BFCM20

PrintGRIP High Tack Sheet for Platens - 15.5x21in

PrintGRIP  |  SKU: GNSU-PRINTGRIP-Y
us-dollar
Use Code: BFCM20, BFCM40, BFCM60
Save $20/40/60 Off Your Order Above $200/400/600 | Valid On Select Products Thru 12/01
banner
GET A GRIP
For a Limited Time: Use code GETAGRIP to try 1 PrintGRIP for only $5. *Limit one per customer.

Single or Pack
Color
$29.95
Flat rate
multi-qty message
In stock
DESCRIPTION

For a Limited Time: Use code GETAGRIP and receive 1 PrintGRIP for only $5. *Limit one per customer.

PrintGRIP is a 1mm polymer gel pad that is the clean, reusable, more effective alternative to traditional pallet adhesives. Take your printing game to the next level! Say goodbye to messy and wasteful methods, and hello to a product that can be used over and over again!

INSTRUCTIONS
  • Start with a clean pallet: Ensure the pallet is free from dust, debris, or old adhesive residues for optimal application.
  • Use Premium Platen Tape on the pallet: Apply a high quality platen tape to your pallet prior to printGRIP. This aids in easier removal of printGRIP later.
  • Align the blank backing: Gently pull up about 2 inches of the blank backing and align it with the back edge of the pallet.
  • Remove the printed top sheet: Spray printGRIP with water before removal to facilitate easier smoothing over the pallet.
  • Apply printGRIP sheet: Carefully remove the bottom backing while simultaneously smoothing down the printGRIP sheet over the pallet. Proceed slowly to prevent the formation of air bubbles.
  • Dry the printGRIP pad: Use a cloth or rag to dry.
  • Secure the edges: Wrap a strip of tape around both the front and back edges of the pallet. This step helps to protect the corners from peeling up during the printing process.

Click HERE for Detailed Product Use Instructions 

FEATURES
  • Colors: Yellow (High Tack), White (Medium Tack)
  • Thickness: 1mm
  • Material: Polymer
  • Works on: 100% Cotton and 50/50 Cotton/Poly Blends, 100% Polyester, Light to Medium weight fleece and Tri-Blends
BENEFITS
  • Economical - No more glue purchase
  • No re-gluing between shirts
  • No special tools or cleaners needed
  • Clean boards half as often
  • No lint build up over time
  • Higher quality prints
  • Fabric lifts off of pallet even and easily
  • Use water to clean lint
  • Dries quickly
  • 100% lint removal when cleaning
  • No glue residue transfer to fabric
  • Non-caustic
EARN 3x REWARDS

Did you know you can earn rewards every time you shop at Screenprinting.com? For every dollar you spend, you’ll receive 3 reward points. It’s that simple. Think of it as a piggy bank for your apparel decoration goals. Save up your points and apply them toward your next piece of equipment—it’s an easy way to make your investment go further!

Learn More and Sign Up Here

PrintGRIP High Tack Sheet for Platens - 15.5x21in | Screenprinting.com
PrintGRIP

PrintGRIP High Tack Sheet for Platens - 15.5x21in

From $29.95

For a Limited Time: Use code GETAGRIP and receive 1 PrintGRIP for only $5. *Limit one per customer.

PrintGRIP is a 1mm polymer gel pad that is the clean, reusable, more effective alternative to traditional pallet adhesives. Take your printing game to the next level! Say goodbye to messy and wasteful methods, and hello to a product that can be used over and over again!

INSTRUCTIONS

Click HERE for Detailed Product Use Instructions 

FEATURES

BENEFITS

FAQ

PrintGRIP FAQ

Single or Pack

  • Single
  • 50 Pack

Color

2 colors available

View product