If you've ever accidentally burnt the rubber top on your aluminum platen, don't worry. Here's a step-by-step guide to getting your platen back in shape.
RELATED: STEP UP YOUR SCREENPRINTING GAME WITH PRINTGRIP
STEP 1: HEAT AND REMOVE
- Warm It Up: Use a flash dryer to heat the damaged rubber.
- Peel It Off: Carefully use a putty knife to lift and remove the rubber. Be cautious, it's hot!
STEP 2: CLEAN THE PLATEN
- Remove Residue: Apply press wash (like Supreme Wash or multipurpose ink stain remover) to clean off leftover rubber and adhesive.
- Dry It: Wipe down with a cotton rag, then reheat slightly to ensure it's dry.
RELATED: MAKE RECLAIM DAY EASY WITH EASIWAY CHEMISTRY
STEP 3: APPLY NEW RUBBER TOP
- Position the Rubber: Get a new rubber sheet. It’s oversized, so align it carefully with the platen.
- Trim Excess: Use a razor blade to cut off the excess rubber, ensuring a snug fit around the edges.
TIPS FOR SMOOTH FINISH
- Avoid Air Bubbles: Smooth out any bubbles as you apply the new rubber.
- Take Your Time: Precision matters. A clean cut ensures better results.
