Use Code: BFCM20 & Save $20 Off Your Order Over $200+

Free Shipping in the Contiguous US Learn More

Use Code: NINJA & Save 20% Off Your First Order Of Transfers

SAVE $20 ON ORDERS OF $200+

BFCM20
USE CODE: BFCM20

PTFE Bottom Table Wrap with Elastic Corners - 16x20in

Ryonet  |  SKU: HTAC-GKCTW-1620
us-dollar
Use Code: BFCM20, BFCM40, BFCM60
Save $20/40/60 Off Your Order Above $200/400/600 | Valid Only On Select Products Thru 12/01
$49.95
9.6 lb
Flat rate
multi-qty message
In stock
DESCRIPTION

16x20 PTFE Bottom Table Wrap w/ elastic corners

FOIL APPLICATION

Foil is applied colored side up and aluminum looking (dull) side down. Rub foil with eraser immediately after application to help remove any wrinkles. Allow transfer to cool completely (20 to 30 seconds) after application before removal of foil sheet. Pull foil sheet off slowly. It can be helpful to tint the 3801LF Foil Adhesive, to the color of the foil being applied, with a small amount of conventional plastisol. This process will help to keep small pinholes in the applied foil film from being noticeable.

APPLICATION TEMP

138°C to 190°C / 280°F to 375°F. Try lower temperature first for best results.

APPLICATION TIME

4 - 9 seconds

APPLICATION PRESSURE

T-shirts = medium (35lbs.)

Sweatshirts = medium to heavy (35 psi to 60 psi)

The brightest foil effect will result when the foil is first removed. To achieve a textured matte finish foil, re-seal the garment or hat in the transfer press for 3-4 seconds after the foil carrier film has been removed.

MORE INFORMATION

For best durability of the foil after it is applied, it is recommended that the garment be hand washed or machine washed (delicate cycle) inside out and line or air dried. Do not use bleach. Do not iron printed area.

MULTI-COLOR FOIL

Two or more colors with foil transfers can be accomplished one of two ways.

  1. Water Based or Discharge Inks. Foil only sticks to plastisol, so if you want foil to only stick to one part of the design, you can print foil adhesive or plastisol where you want the foil to transfer to and the rest of the design use water based or discharge inks. When transferred, foil will only stick to the plastisol area of the print.
  2. Foil Resist Additive. Foil resist additive can be added into plastisol at around 15% per weight to resist the foil from adhering to the plastisol ink during the transfer process.
SPECIAL EFFECTS & FOIL

Foil can be transferred to a plethora of special effects inks. Depending on how the ink is printed, foil will stick to some or all of the design. It will work with puff, high density, granite base, blowout, suede and more. Crumpling the foil also creates a cool effect.

FREE GROUND SHIPPING (SUPPLIES ONLY)

FREE SHIPPING

All supplies in orders over $275 ship for free. Orders below $275 ship for $15. Orders placed before 3pm local time typically ship the same day.

FLAT RATE SHIPPING

Flat rate shipping charges will be assigned to our Equipment and heavier consumable items. View our entire FREE Shipping Policy

GROUND SHIPPING ZONES

UPS Ground Shipping Zones

If you need clarity on estimated shipping to your area please chat with us or call us at 1-800-314-6390

POPULAR PRODUCTS

VIEW MORE
Riley Hopkins 360 screen printing press set up with multiple screens in vibrant colors, ready for multi-color printing. A printed shirt with a detailed, colorful design is positioned on the platen, showcasing the precision and versatility of the screen printing process.

RILEY HOPKINS

MANUAL PRESSES

SHOP THE COLLECTION
Person holding a scoop coater filled with bright blue emulsion, positioned next to a screen ready for coating. The setup highlights the preparation stage of screen printing, where precision and even coverage are key for creating quality stencils.

INDUSTRY LEADING

EMULSIONS

BUY NOW

PLASTISOL INK

MIXING SYSTEMS

GRAB YOURS
Screen exposure unit with a glowing orange and blue light, holding a screen and Baselayr output film in place. The darkroom setup emphasizes the precision and technology used to create sharp, detailed stencils for screen printing.

BASELAYR

LED EXPOSURE UNITS

ORDER NOW

THINGS YOU SHOULD KNOW

View all
Teflon Bottom Table Wrap with Elastic Corners - 16x20in | Screenprinting.com
Ryonet

PTFE Bottom Table Wrap with Elastic Corners - 16x20in

$49.95

16x20 PTFE Bottom Table Wrap w/ elastic corners

FOIL APPLICATION

Foil is applied colored side up and aluminum looking (dull) side down. Rub foil with eraser immediately after application to help remove any wrinkles. Allow transfer to cool completely (20 to 30 seconds) after application before removal of foil sheet. Pull foil sheet off slowly. It can be helpful to tint the 3801LF Foil Adhesive, to the color of the foil being applied, with a small amount of conventional plastisol. This process will help to keep small pinholes in the applied foil film from being noticeable.

APPLICATION TEMP

138°C to 190°C / 280°F to 375°F. Try lower temperature first for best results.

APPLICATION TIME

4 - 9 seconds

APPLICATION PRESSURE

T-shirts = medium (35lbs.)

Sweatshirts = medium to heavy (35 psi to 60 psi)

The brightest foil effect will result when the foil is first removed. To achieve a textured matte finish foil, re-seal the garment or hat in the transfer press for 3-4 seconds after the foil carrier film has been removed.

MORE INFORMATION

For best durability of the foil after it is applied, it is recommended that the garment be hand washed or machine washed (delicate cycle) inside out and line or air dried. Do not use bleach. Do not iron printed area.

MULTI-COLOR FOIL

Two or more colors with foil transfers can be accomplished one of two ways.

  1. Water Based or Discharge Inks. Foil only sticks to plastisol, so if you want foil to only stick to one part of the design, you can print foil adhesive or plastisol where you want the foil to transfer to and the rest of the design use water based or discharge inks. When transferred, foil will only stick to the plastisol area of the print.
  2. Foil Resist Additive. Foil resist additive can be added into plastisol at around 15% per weight to resist the foil from adhering to the plastisol ink during the transfer process.

SPECIAL EFFECTS & FOIL

Foil can be transferred to a plethora of special effects inks. Depending on how the ink is printed, foil will stick to some or all of the design. It will work with puff, high density, granite base, blowout, suede and more. Crumpling the foil also creates a cool effect.

View product

TOP-TIER SERVICE
Back to top