For a Limited Time: Use code GETAGRIP and receive 1 PrintGRIP for only $5. *Limit one per customer.
PrintGRIP is a 1mm polymer gel pad that is the clean, reusable, more effective alternative to traditional pallet adhesives. Take your printing game to the next level! Say goodbye to messy and wasteful methods, and hello to a product that can be used over and over again!
INSTRUCTIONS
-
Start with a clean pallet: Ensure the pallet is free from dust, debris, or old adhesive residues for optimal application.
-
Place transfer paper on the pallet: This aids in easier removal of printGRIP later.
-
Align the blank backing: Gently pull up about 2 inches of the blank backing and align it with the back edge of the pallet.
-
Remove the printed top sheet: Spray printGRIP with water before removal to facilitate easier smoothing over the pallet.
-
Apply printGRIP sheet: Carefully remove the bottom backing while simultaneously smoothing down the printGRIP sheet over the pallet. Proceed slowly to prevent the formation of air bubbles.
-
Dry the printGRIP pad: Use a cloth or rag to dry.
-
Secure the edges: Wrap a strip of tape around both the front and back edges of the pallet. This step helps to protect the corners from peeling up during the printing process.
Click HERE for Detailed Product Use Instructions
FEATURES
- Colors: Yellow (High Tack), White (Medium Tack)
- Thickness: 1mm
- Material: Polymer
- Works on: 100% Cotton and 50/50 Cotton/Poly Blends, 100% Polyester, Light to Medium weight fleece and Tri-Blends
BENEFITS
- Economical - No more glue purchase
- No re-gluing between shirts
- No special tools or cleaners needed
- Clean boards half as often
- No lint build up over time
- Higher quality prints
- Fabric lifts off of pallet even and easily
- Use water to clean lint
- Dries quickly
- 100% lint removal when cleaning
- No glue residue transfer to fabric
- Non-caustic
FAQ
PrintGRIP FAQ
